Sale!

Multifunction Process Calibrator for mV mA TC RTD Hz

$135.00 $133.30

BRT MCHB03 Portable Process calibrator can simulate 0-11V, 0-110mV, 0-24mA, 20-400Ohm, 100-10KHz signal, thermocouple tc type K, J, E, B, R, S, T, N signal, thermal resistance RTD PT100, CU50, 4-20mA loop signal, and it can also measure 0-±30V, 0- ±150mV voltage signal, 0- ±30mA current, 0-999Ohm, 0-10kHz, PT100, Cu50 and temperature signal below zero Celsius degree, etc. Each output signal has matched functional button. With clear LCD screen with back light, two terminal blocks, one-time protection fuse and protection circuits and small size, it becomes a low cost and high precision alternative replacement of fluke multifunction temperature and mV mA loop calibrator.

Description

Multifunction Process Calibrator Specifications

BRT MCHB03 Portable multifunction process calibrator is a portable current, voltage, mV, resistance, frequency, rtd thermal resistance, thermocouple temperature calibrator meter. It has all the functions needed in signal calibration and adjustment on PLC, DCS, ESD, industrial site instruments, valve, frequency converter, etc. That process calibrator can simulate and read most of the analog signal in industrial site. It operates in high accuracy, high stability. The high resolution screen with back light displays output signal or testing results clearly and simultaneously. Refined high integrated circuits makes that calibrator generator meter operate in high efficiency and accuracy. ABS material case, small size, simple operation steps, it is easy to carry and use in outdoor industrial site and labs.

BRT Multifunction Process Calibrator Highlights
-Internal embedded electric switch not DIP switch, easy to use.
-High resolution LCD screen display with back light, can be used in the sites with dim light.
-Refined silicon press button with function description, very convenient to operate.
-Have one time fuse protection and embedded protection circuit to avoid damage caused by misoperation.
-Support voltage signal 0-11V, 0-110mV, current 0-24mA, current loop signal, resistance 20-400Ohm, frequency 100-10KHz, thermocouple tc type K, J, E, B, R, S, T, N signal simulation, thermal resistance RTD PT100, CU50, 4-20mA loop signal simulation.
-Have measurement function: measure 0-±30Vdc, 0- ±150mVdc voltage signal, 0- ±30mA current, 0-999Ohm, 0-10kHz, PT100, Cu50 and temperature signal below zero Celsius degree, etc.
-Low sensitivity to external current incitation when it outputs RTD thermal resistance and resistance to ensure high accuracy output and testing results.
Portable handheld size: 162x80x32mm (LxWxH) easy to carry.
-Large capacity 3300mAH rechargeable battery embedded inside, avoid buying.extra battery, energy saving design.
-Light weight, only 500g.

BRT Portable Process Calibrator Simulation Output Function

OUTPUT OUT UNITSETTING  RANGESETTING STEP 

ACCURACY

DC.Volt.V0~11.00V0.01/0.1/10.025%+1
DC.mVmV0~110.00mV0.1/1/100.025%+2
ΩΩ20~400Ω1/10/1000.025%+0.3Ω
DC.mAmA0~24.00mA

Active/Passive/Programmable

0.01/0.1/1/40.025%+1
TCR0~1700℃1/10/1000.1%+3
S0~1600℃
B500~1800℃
K-200~1370℃0.1%+1
E-200~1000℃
J-200~1200℃
T-200~400℃
N-200~1300℃
RTDPt100-200~850℃1/10/1000.025%+1
Cu50-50~150℃0.025%+2
FrequencyHZ100-10kHz100/10000.3%
24V24V

mA

24V (fixed, cannot be adjusted) Current measuring: 0~24.000 mANone24V:0%-20%

MA Current measuring: 0.025%+4

*Note: Ω/RTD output: 0.2-3mA incitation current, can measure Constant or non-constant current resistance, the accuracy of lead resistance does not included.
TC output: The accuracy of cold-junction compensation error does not included.
24V output: can drive the output load and measure current in 24V loop.

BRT Process Calibrator Measurement Functions

MEASUREMENTUNITSMEASURE  RANGERESOLUTIONAccuracy
DC.VV0~30.000V0.001V0.025%+4
DC.mVmV0~150.00mV0.01mV0.025%+2
ΩΩ0~999.9Ω0.1Ω0.025%+2
DC.mAmA0~30.000mA0.001mA0.025%+4
TCR0~1700℃1℃0.1%+3
S0~1600℃
B500~1800℃
K-200~1370℃0.1%+1
E-200~1000℃
J-200~1200℃
T-200~400℃
N-200~1300℃
RTDPt100-200~850℃1℃0.025%+1
Cu50-50~150℃0.025%+1
FrequencyHz0-10KHz0.1%0.1%
Range switchmA0-24mA

0~99900 Unit(Used for current measuring and current measurement of 24V output)

Max. 4, Min. 1(related to engineering quantity)0.025%+1-10

Based on the engineering quantity.

*Note: Ω/RTD Measurement: the accuracy of lead resistance does not included.
TC Measurement: The accuracy of cold-junction compensation error does not included.
24V Measurement: can do square root on signal.

Resistance Frequency Voltage Current Calibration Testing Report

Process Calibrator with Resistance Frequency Current Voltage Output
Resistance Frequency Temperature Current Voltage Calibrator Testing

 

Additional information

Weight1 kg
Dimensions20 x 10 x 5 cm
Output

V, mV, mA, Resistance, RTD, TC, Frequency signal.

Measurement

0-±30V, 0- ±150mV voltage signal, 0- ±30mA current, 0-999Ohm, 0-10kHz, PT100, Cu50 and temperature signal below zero Celsius degree, etc.

Highlight

Portable high accuracy, can measure temperature signal below Zero ℃.

Packing list

1 Unit x Original Multifunction Process Calibrator
1 PCS x USB Cable for power charge
2 PCS x Testing clip
1 Set x User Manual
1 PCS x Portable protection bag

VIP Note

Securely shopping without any Paypal/bank charge! Get credit points, get amazing discount price by Registering Your Account! Buy with confidence!

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…