Adjustable PWM Sine Wave 0-10V 0-20mA Signal Generator

(1 customer review)

$22.89$38.27

BRT VIFM Adjustable 0-10V 4-20mA frequency PWM sine wave generator meter outputs 0-10V, 0-20mA source signal, PWM waveform with adjustable 0%-100% duty cycle, 0-1KHz sine wave signal. Inside the signal generator, PWM modulation and regulation circuits and operation amplifier are used to ensure high accuracy and stable output. Its output precision can be calibrated by user and adjusting steps have fine adjusting and coarse adjusting modes.

Description

BRT VIFM Panel-mounted PWM sine wave 0-10V 0-20mA signal generator is a kind of duty ratio adjustable pulse frequency, sine wave, PWM signal output panel meter. It outputs 1-150KHz frequency signal, duty ratio is adjustable, 0-10V voltage signal, 0-20mA 4-20mA current signal. Output sine wave signal range is 1Hz-1kHz, the min. input frequency is 1Hz, the max. frequency is 1KHz. That PWM sine wave signal generator can be used to control and drive stepping motor, used as square wave generator to provide square wave signal source for meters, sensor, MCU or other devices, be applied in light and speed control and adjustment.

Main Features
● Standard panel-mounted shell, LCD display.
● Improve stability and reduce calibration costs.
● Adjustable DC current or voltage signal simulation output: 0-20mA, 4-20mA, 0-10V, etc.
● 1-150KHz PWM signal output, frequency, duty cycle, amplitude is adjustable. Amplitude volt. is 1-24V.
● Sine wave signal output, output frequency is adjustable PWM frequency, pulse signal output mode.
● Can be used as calibrator signal source to calibrate transmitters or sensors.
● Output precision can be calibrated through encoder’s knob.
● Operating temperature range: 0–55℃, non-condensation.
● 7-12VDC wide range power supply input.

Typical Applications
● Used as square wave signal generator to output square wave signal.
● Used as deriving module to control stepping motor.
● Used as 2-10V 4-20mA source signal simulator generator.
● Output adjustable pulse to control PWM circuit or adjust light and speed, MCU, etc.

Technical Parameters

Power supply input:7-12Vdc
Output signal:PWM signal, pulse signal, 0-10V 0-20mA source mode, sine wave signal, adjustable output
PWM output:voltage, frequency, duty cycle all are adjustable, the accuracy is up to 0.1%; voltage range: 1-24V, frequency range: 1-150KHZ, duty cycle range: 0-100%
Pulse output:start delay time T0: 0-60S, high level time T1: 0-60S, low level time T2: 0-60S, pulse number PulseNun: 1-60000, accuracy 0.001S
Signal source:voltage source 0-10V adjustable, current source 0-20mA 4-20mA adjustable
Sine wave:1-1000Hz adjustable
Signal load capacity:output current maximum 30mA (*its output is signal source, cannot directly drive high power load.)
Accuracy:better than 0.1%
Output calibration:Support user’s self-calibration
Ambient temperature:-10-+70°C
Size (L x W x H):79 x 43 x 41mm
Cut-out size (L x W):76 x 39mm
Weight:about 35g

Button Functions:
1. Press down knob: fine or coarse adjusting switching.
2. Rotate knob: adjusting output signal value.
3. P1 button: PWM signal output mode.
4. P2 button: pulse signal output mode.
5. P3 button: 4-20mA 2-10V source signal output mode. Press P3 button twice, the signal generator outputs sine wave signal.
6. SET Button: set frequency, voltage, current signal. Set starting delay time, high/low level time, pulse numbers., etc.
Restore factory settings: In the case of power off, press and hold P1 not release, then power on and release, it will be reset to factory setting.

PWM Generator Parameters Setting:

PWM frequency signal generator
PWM frequency signal generator
Pulse frequency generator
4-20mA 2-10V Pulse frequency generator
2-10V 4-20mA sine wave generator
0-10V 0-20mA sine wave generator

PWM Generator Testing Show

4-20mA 0-10V PWM Sine Wave Signal Generator testing
0-20mA 0-10V PWM Sine Wave Signal Generator testing

Additional information

Weight0.15 kg
Dimensions4.3 × 2.9 × 0.9 cm
Output

1Hz-150KHzPWM output, duty ratio adjustable, 1Hz to 1KHz sine wave signal, 2-10V 4-20mA source signal.

Power Supply

7-12VDC,

Packing List

1 Unit x Original 4-20mA 2-10V Frequency PWM Signal Generator Module
1 Set x Professional User Manual

Why Choose Us?

Securely shopping without any Paypal/bank charge! Get credit points, get amazing discount price by Registering Your Account! Buy with confidence!

-100% original Premium version only.
-More than 5 years experience.
-Factory direct price and quality.
-Professional user manual.
-Various full range.
-MOQ 1 unit.
-24 months warranty.
-Fast shipping.
-Protect your privacy, no spam email.
-Support Visa, Master Card, American Express, Paypal payment online.

How to Buy?

Select the quantity, Click Button" Add to Cart" —-> then click button "View cart"—->go next step accordingly.

Add. Function

No MODBUS Function, Have MODBUS Function

1 review for Adjustable PWM Sine Wave 0-10V 0-20mA Signal Generator

  1. BABRUBAHAN (verified owner)

    excellent with low cost

Only logged in customers who have purchased this product may leave a review.

You may also like…