Sale!

4-20mA 0-10V Current Voltage Process Calibrator

$141.00 $137.00

BRT VIGL Current Voltage Calibrator is a high accuracy signal simulation testing meter. It widely used in 4-20mA current simulation, passive 4-20ma current loop simulation, 0-10V voltage signal simulation. Only switching the button, it can achieve 4-20mA current or 0-10v voltage output. Its output accuracy is 2 digits after decimal points, the output simulation adjusting accuracy is 0.01. The high resolution LCD can display the output signal correspondingly timely. That current voltage calibrator is a perfect low cost replacement of fluke process calibrator or 4-20mA 0-10V signal generator fluke.

Description

That 4-20mA 0-10V Current Voltage Calibrator is embedded with 2000-25000mAH rechargeable Li battery, low power consumption design, long stand-by time. It has micro USB port to charge battery, and large LCD screen with backlight can display parameters clearly. Adjusting methods of 4-20mA current simulation output: the international universal five points adjusting method and shortcut key, 0.1 and 0.01 step switching.

Current Voltage Calibrator Main Parameters

Active current simulation output range:0-21mA
Voltage simulation output range:0-11V
Passive 4-20mA current loop simulation output:Simulate various types of 4-20mA transmitter output
Output/adjusting Accuracy:2 bytes/digits after decimal.
Max. driving load capacity:≥ 750Ω
Current terminals has no load or break line in load:the calibrator displays “open circuit”
Display screen:Clear high contrast, large viewing angle, no discontinuous and granular sensation like that dot-matrix LCD.
Protection circuit:Multiple protection circuit embedded
Output mode:Have mA, V and passive current output switching button
Signal adjustment:Four add-subtract keys to adjust output signal

DC Current Voltage Calibrator Benefits and Features
-High precision, low temperature drift voltage reference IC, DAC IC chip used to ensure stable accurate output.
-Valve calibration, PLC, DCS, meters and other automatic controlling system adjustment and testing.
-Only five buttons, easy to operate in industrial site.
-Output 20mA full load, its continuous operating time is up to 13-14 hours.

DC Current Voltage Calibrator Wiring Circuit

DC Current Voltage Calibrator Wiring Circuit
DC Current Voltage Calibrator Wiring Circuit

Process Calibrator Operating Methods
>> Backlight: Press the two buttons on the right side at the same time , the backlight is on, then press again the backlight is off.
>> Press the two buttons on the left side at the same time to switch the adjusting step between 0.1 and 0.01.
>> Two buttons on the right side are add-subtract short-cut button; two buttons on the left side are step add-subtract short-cut button.
>> The button at the bottom function: active current, voltage, passive current switch.

Additional information

Weight0.3 kg
Dimensions15 x 15 x 5 cm
OUTPUT RANGE

0-21mA Current, 0-11V Voltage

PACKING LIST

1pcs x USB cable for battery charging.
2pcs x Testing cable.
1Unit x Original 4-20mA 0-10V Current Voltage Calibrator.

VIP NOTE

Securely shopping without any Paypal/bank charge! Get credit points, get amazing discount price by Registering Your Account! Buy with confidence!

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…