Description

BRT HU520 Temperature mV thermocouple generator simulator module is a type of mV small signal, type K, type N thermocouple signal simulation circuit module. It is a low cost high accuracy thermocouple signal simulator tester for meters, PLC, DCS signal debugging, testing, and a perfect thermocouple signal simulation meter.

Technical Parameters

Connection Interface 
P1: Power supply interface
VDD: 7-12VDC power supply +
GND: Power supply –
P2: Output signal interface
CH1: Signal channel#1: output -10mV– +110mV
CH2: Signal channel#2: output -100mV– +1100mV
GND: power supply –

Operating Instructions
>> Buttons description
UP: LCD Previous Page Display
DWON: LCD Next Page Display
ADD: Plus Key
SUB: Subtract Key
FUN: Select/Set data operation mode(Long hold to set or switch signal into ON/OFF).

>> -10mV to +110mV Voltage Simulation
LCD Display Interface
First Line: “1. P1:-10mV~+110mV ”
Second Line: ” *0.01 0.00mV ”
Channel#1: Output -10mV~+110mV
Button Operation:
FUN: Select/Set data operation mode(Long hold to set or switch signal into ON/OFF).

>> -100mV to +1100mV Voltage Simulation
LCD Display Interface
First Line: “2. P2:-100mV~+1100mV ”
Second Line: ” *0.1 0.0mV ”
Channel#1: Output -100mV~+1100mV
Button Operation:
FUN: Select/Set data operation mode(Long hold to set or switch signal into ON/OFF).

>> Type K Thermocouple Signal Simulation
LCD Display Interface
First Line: ” 3.P1:K-TC ”
Second Line: ” *0.1 0.0’C ”
Channel#3: Simulation output type K thermocouple -200～+1370℃
Button Operation:
FUN: Select/Set data operation mode(Long hold to set or switch signal into ON/OFF).

>> Type N Thermocouple Signal Simulation
LCD Display Interface
First Line: ” 4.P1:N-TC ”
Second Line: ” *0.1 0.0’C ”
Channel#4: Simulation output type N thermocouple -200～+1300℃
Button Operation:
FUN: Select/Set data operation mode(Long hold to set or switch signal into ON/OFF).

*More details about type N K thermocouple generator simulator, please contact us.